Home / Decoration / DIY – How to Build a Wooden Pallet Wall – The Kelly Homestead diy pallet wall
DIY – How to Build a Wooden Pallet Wall – The Kelly Homestead

 diy pallet wall

DIY – How to Build a Wooden Pallet Wall – The Kelly Homestead diy pallet wall

DIY – How to Build a Wooden Pallet Wall – The Kelly Homestead diy pallet wall

Pallets are among the most popular craft items as they are a cheap source of rustic wood that can be made into almost anything. Today we are continuing the pallet theme with pallet-clad walls, which is a popular decorating idea to add cozier to any home. Pallet-clad walls add a cozy, rustic feel to any room and look good almost anywhere, from bathrooms to kitchens, from industrial to modern interiors. Only a pallet wall can change the overall appearance of the room and make it more comfortable, which is particularly relevant in autumn.
Every project requires a certain amount of pallet wood. So keep in mind that you have to disassemble the pallets first to get the wood. It can be a little tricky, and if the wall is big you will need a lot of wood. So ask someone for help.

The first project deals with cladding the wall with pallet wood. Here they first installed the rough vertical lengths on the marked border lines to use as the primary wood map for the entire area that will be clad in wood.

To highlight a headboard wall in this bedroom, the authors used pallet wood. But first they disassembled the pallets and stained the wood they got.

The dead space here has been highlighted with pallet wood, and since the room was quite small the wood was cut to properly cover it. The result looks rustic and weathered, have fun!

This bedroom for boys has a nice wooden pallet wall behind the beds. After stripping and sanding the pallets, glue thin pieces of plywood to the wall by inserting them directly into the studs with wood screws. To avoid random gaps in problem areas, simply stain the plywood behind the seams before pinning a wooden batten over it to mask the gaps.

Attic walls can be difficult to decorate, but here's a project that explains how to deal with it. Fill in the entire surface of the target wall and give the planks the sharp angled cut where a neat and clean infill and full imprint is required.

A pallet wall for only $ 20? It is real! In this tutorial, we will teach you how to cover an entire wall with stained pallet wood and not break the bank at the same time.

In this DIY you will find a similar idea, but the wall is smaller, it's an entertainment center wall. It looks very bulky and stands out. If you want, you can also add storage space for magazines or books on each side - just give the wall more volume!

Ten pallets were used for this project; They were brightly colored, but if you want the same look with the usual palettes, you can paint them and then sand them for a brightly colored, worn, and weathered look.

This little corner in the living room was decorated with pallet wood. First they peeled off the pallets, then stained the wood with oil and let it dry. To make the cladding easier, some thin planks were installed first.

The last tutorial deals with cladding a fireplace wall with pallet wood. Stripping the pallets may be difficult, but it's worth it. So do it and start dressing up the wall. It will be a great statement wall for every season and add cosiness for the coming fall.

About Warwick

Warwick Zach Godfrey is a farmer with a happy marriage. He also writes about plants on various blogs.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

x

Check Also

Fall Tree Contact Paper Play toddler fall crafts

toddler fall crafts