Bengal scratching post diy cat dig
Cats love to have their own digs where no one can disturb them. This is why it is imperative for a cat owner to make one.
Prepare 1 yard of personalized fabric on eco-friendly canvas, 1 yard of lining fabric, 1 yard 1/2 "thick foam, a seat cushion, a free sample.
First, print out the pattern you want or use the pattern from the original tutorial. Print out the free sample download and glue it together! The pieces are about 1/2 "extra so cut and adjust the lines as shown in the pictures. Cut out the following pieces: a front, a top, a pillow, a base, a back, a Foam front and back. Sew the top to the center of the front. This piece is contoured a little so the top bends out a little, and you can use 2 fabrics too. Sew the front along the sides and top of the pattern to the back. Use a 1/4 "seam allowance. Cut off the top corners of the ears, but don't cut off the seam allowance. Push and turn. Pin the base piece with the right sides together around the bottom of the cat bed. You have to turn around and plug in and off you go. To make this part easier, just sew your base and around the bottom of the cat bed and pull the threads as needed. Also, mark the base with pens to divide it into quadrants, then match the sides to the sides of the cat bed piece. When you've pinned all the way, the cat bed is inside out. Sew around the base. Turn right. Repeat with lining fabric. Now take your foam pieces. Sew the front and back foam together along the edges.
Keep reading the tutorial and get the detailed photos in the source.